top of page


A intuiative model

with removable sides!

Treat your heat pump or air conditioning unit to the ultimate in protection and style with OUTSTEEL's BUBBLES cover!

This delightful cover is designed to keep your device safe from shocks and bad weather, with a clever clip-on front for easy access. Available in a range of sizes and colours, you can install it wherever you need to - whether it be high up on a wall, on the ground, on the terrace or in the garden.

Get your BUBBLES cover today for the perfect blend of protection and elegance!


Product Details

Available in 3 sizes, the BUBBLES model is compatible with most brands of heat pumps and air conditioning units. BUBBLES, with its perforated design, promotes the circulation of the air flows necessary for the proper functioning of the devices. 

The basic BUBBLES model is intended for wall mounting (without a bottom plate, back plate or feet). However, depending on the location of the heat pump or air conditioning unit, the BUBBLES model can be completed with: 

> a bottom plate, provided when the heat pump is fixed to the wall at height in order to hide the installation from being seen from below, providing a better aesthetic integration. 

> a back plate, provided when the heat pump is installed free-standing on the ground. The back plate allows the heat pump to be completely covered and gives a perfect 360° look. In this case, 4 additional feet are provided to raise the heat pump cover off the ground to enable connection pipes to pass under.

> feet (in pairs),  provided when the heat pump is to be free-standing (2 pairs of feet required). The feet allow the cover to be raised off the ground to enable connection pipes to pass under

BUBBLES is available in 4 monochrome colours and 1 two-tone model as shown.  BUBBLES is also customisable to order in the RAL shade of your choice for perfect integration of the heat pump or air conditioning unit (25% additional cost). 

BUBBLES wall-fixed


BUBBLES is available in the following 4 RAL colours as standard plus a two-tone model.

Other RAL colours are available to order (excludes two-tone model).

RAL colours


BUBBLES is available in 3 possible configurations:


Wall-hung with bottom

BUBBLES wall-hung side
BUBBLES wall-hung front

Floor model with back, front & 4 feet

BUBBLES free-standing side
BUBBLES free-standing front


BUBBLES is available in 3 sizes (inner dimensions LxHxW): 

   Wall-hung Model:
   S : 850 x 716 x 470 mm
   M : 950 x 766 x 520 mm

   l: 1050 x 866 x 550mm

Adjust the width/depth of the wall-hung model: Up to 100 mm

Weight: from 23 kg to 41.3 kg

 Floor Model:

   S : 850 x 784 x 470 mm
   M : 950 x 834 x 520 mm

   l: 1050 x 934 x 550mm


All OUTSTEEL heat pump and air conditioning covers have been tested by the CÉRIC Laboratory and have a  two-year warranty.

Installation Video

Installation Guide

BUBBLES installation guide

Want to know more?

Outsteel Brochure

Download the Outsteel brochure here

bottom of page